Suspended Type Hot Air Conveying Furnace Details:
Classification:Automated drying equipment
Series:Dring Furnace
Parameters:
Purpose:PCB anti-welding pre-baking
FEATURES
●Uniform temperature: PID temperature controller, with high performance SSR to improve temperature accuracy
●Stable transmission: improved structure, do not contact the surface, horizontal feed
●Easy operation and maintenance: touch screen panel operation + each section has an independent door maintenance door
Energy saving and high efficiency: welding resistance tunnel type oven, suspension type patent splint structure
●The air inlet is equipped with a filter to avoid secondary pollution
E-mail: [email protected]
Product details
Machine name: | Hanging Heat Air Conveying Furnace |
Use size: | PCB board thickness: 0.3-3.2mm, PCB size:A.630*730mm B.730*1250mm C.1250*1250mm |
Exhaust air rate: | 8-12 m/s |
Electricity demand: | AC380V 50Hz 3N 135Kw |
Air source demand: | 20L/min,5KG/c㎡,1/4”PTconnector or Φ12tube |
Heating device: | Special efficient ceramic electric heater, more uniform heat generation, higher heat exchange coefficient, longer service life |
Temperature: | Room temperature range from +10℃ to Max. 80℃, can be set freely according to requirements, usually 75℃ |
Feeding mode: | The vacuum adsorption is combined with the mechanical arm to make the PCB hang vertically into the board |
Motor drive: |
①Three-phase motor, with frequency converter and positioning system to make the fixture positioning and transmitting stably ②PTFE mesh conveyor belt , more durable and stable. ③Modular drive components, saving maintenance time |
Control interface: |
Humanized vertical operation panel, touch screen, combined with operation convenience and maintenance convenience |