Precision Nitrogen Furnace
Classification:Automated drying equipment
Series:Drying OVEN
Parameters:
Purpose: PCB open material、PCB plug hole、PCB electroplated baking、PCB text after baking
Features
●Good sealing
●Good heat preservation
●Nitrogen content above 95%
●Dust-free: The inner furnace is made of SUS stainless steel, which will not cause secondary pollution to the product
●Energy saving: The head exhaust valve is closed to reduce energy consumption as much as possible
●Safety: mechanical overtemperature protection, main temperature control upper and lower limit overtemperature prevention circuit, as the safest temperature protection device, overtemperature temperature anomaly, alarm notification, automatically cut off the system power, artificial safety confirmation.
●High temperature resistant motor in the furnace, with large air volume and multi-wing wind wheel, the temperature is reliable, according to the production demand can be gradually heated up
●Increase safety production protection, baking time to open the safety door.
E-mail: [email protected]
Product details
Machine Name: | Precision Nitrogen Furnace |
Machine Internal Dimensions: | Width 840 * Height 1500 * Depth 800mm |
Power Demand: | AC380V 50Hz 3N |
Air Source Demand: | 20L/min, 50KG/C㎡,1/4”PTconnector or Φ12tube |
Heating Device: | Special high temperature energy-saving electric heater, more uniform heat generation, higher heat exchange coefficient, longer service life |
production mode: | Man-machine PLC operation, the whole process control, can realize MES formula delivery, effectively prevent man-made process errors |
Temperature: | Room temperature from +20℃ to Max. 160℃, can be set freely according to requirements, commonly used 75℃/150℃ |
Control Interface: |
Humanized vertical operation panel, touch screen, combined with operation convenience and maintenance convenience |