Precision Hot Air Transfer Furnace After Solder Resistance Vacuum
Classification:Automated drying equipment
Series:Dring Furnace
Parameters:
urpose: PCB solder resist pre-bake、PCB baking afer plugging hole、PCB browning after baking
Features
●Dust-free: The inner furnace is made of SUS stainless steel, which will not cause secondary pollution to the product
●Energy saving: The head exhaust valve is closed to reduce energy consumption as much as possible
●Safety: mechanical over-temperature protection, main temperature control upper and lower limit over temperature prevention circuit, as the safest temperature protection device, over-temperature temperature anomaly, alarm notification, automatically cut off the system power, artificial safety confirmation.
●Professional research and development of customized force bone, with high strength chain, higher bearing capacity. With strong torque transmission motor, turbo worm reducer, stable and strong transmission.
●Frame type step conveying, can be matched with AGV for automatic production, the whole process to achieve no manual production.
●High temperature resistant motor in the furnace, with large air volume and multi-wing wind wheel, the temperature is reliable, according to the production demand can be gradually heated up
●The outlet is equipped with large air volume axial flow fan to cool the layout, reduce the impact on the surrounding environment, and increase the operation affinity
E-mail: [email protected]
Product details
Machine Name: | Precision Hot Air Transfer Furnace After Solder Resistance Vacuum |
Machine Internal Dimensions: | 800*800mm |
Power Demand: | AC380V 50Hz 3N |
Air Source Demand: | 20L/min, 50KG/C㎡,1/4”PTconnector or Φ12tube |
Heating Device: | Special high temperature energy-saving electric heater, more uniform heat generation, higher heat exchange coefficient, longer service life |
Feeding mode: | Frame type insert plate feeding, can be connected to automatic retracting and releasing board machine, the front end can be equipped with welding resistance vacuum machine, to realize automatic production |
Temperature: | Room temperature from +20℃ to Max. 160℃, can be set freely according to requirements, commonly used 75℃/150℃ |
Control Interface: | Humanized vertical operation panel, touch screen, combined with operation convenience and maintenance convenience |