Double Frame Precision Hot Air Conveying Furnace
Classification:Automated drying equipment
Series:Dring Furnace
Parameters:
Purpose: PCB solder resist pre-bake、PCB baking after texting、PCB baking afer plugging hole、PCB browning after baking
Features
●Dust-free: The inner furnace is made of SUS stainless steel, which will not cause secondary pollution to the product
●Energy saving: The head exhaust valve is closed to reduce energy consumption as much as possible
●Safety: Mechanical overheat protection, main temperature control upper and lower limit over-temperature prevent short-circuit. As the safest temperature protection device, upon over-temperature emergence, beside alert notification, it will automatically cut off the system power, and execute artificial safety confirmation.
●Professional research and development of customized force bone, with high strength chain, higher bearing capacity. With strong torque transmission motor, turbo worm reducer, stable and strong transmission.
●Double frame step conveying, two baskets into theFurnace at the same time, save energy, improve productivity, save space.
●With high temperature resistant motor in the furnace, and large air volume and multi-wing wind wheel, the temperature is reliable, and it can gradually heated up according to the production demand.
●The outlet is equipped with large air volume axial flow fan to cool the layout, reduce the impact on the surrounding environment, and increase the operation affinity.
E-mail: [email protected]
Product details
Internal dimensions | 1580*755 mm |
Exhaust air rate | 8-12 m/s |
Electricity Demand | AC380V 50Hz 3-phase |
Air Source Demand | 20L/min, 50KG/C㎡,1/4”PTconnector or Φ12tube |
Heating Device | Characteristic high temperature energy-saving electric heater, more uniform heat generation, higher heat exchange coefficient, longer service life |
Feeding Mode | Double frame insert plate frame at the same time, which step spacing is 762mm, effectively width of the frame is 558.5mm. |
Temperature | Room temperature from +50℃ to Max. 160℃, can be set freely according to requirements, commonly used 150℃ |
Control Interface | Humanized vertical operation panel, touch screen, combined with operation convenience and maintenance convenience |